Heat deflection temperature >100C after annealing or 65-70C as printed

1. Oven method: 110–120°C for 30-60 min. The oven needs to be preheated before loading the parts in and the oven shall be shut down to let the parts cool down slowly. In addition, the temperature needs to be precisely controlled. A normal household oven is not recommended
2. Boiling method: seal the parts in bag and anneal in boiling water for at least 60 mins then let it cool down slowly. Please make sure the bag is sealed, not floating, and the parts are not in contact with water.

Reliability

ZYLtech filament is all about reliability. When you need a stronger and more durable functional part, you need to know you are printing with a material you can trust and depend on. ZYLtech’s NO. 1 goal is to provide you with the most reliable and the strongest 3D printer filament at the best price possible.  

Quality Control

ZYLtech PLA 3D printer filament is meticulously tested for quality and consistency. We use top quality US based raw materials and additives for reliable results time after time. Our 1.75mm PLA filament tolerances of ±.05mm make for steady feed rates and reliable extrusion on both Bowden and Direct Drive setups!   

Affordability

ZYLtech PLA filaments are designed with price in mind; we created an affordable solution for every 3D maker. Whether you are a pure beginner with a finite budget, or an additive manufacturer looking to save on cost of production, ZYLtech PLA is the filament to get any job done.

Color Consistency:

It's important to us at ZYLtech that all of our 3d printer filaments have consistent color in each and every roll that comes off the production floor.  Our chemist and quality control department work closely to ensure that our formulas produce reliably reproducible results every time.