Premium Edition 2S LiPo with 7.6V High-Voltage Performance
The ProTek R/C Spencer Rivkin 2S 130C Low IR Si-Graphene + HV ULCG Shorty LiPo Battery is a premium-grade power source designed for competitive 1/10th scale racers. Designed in collaboration with Team Associated driver Spencer Rivkin, this high-performance 7.6V 4800mAh shorty pack delivers elite-level power and consistency for serious racers. The case is equipped with a specialized pocket on the bottom for adding optional battery weights, such as the ProTek R/C Battery Weight Set (PTK-5077 or PTK-5078 - sold separately), to further lower the center of gravity and fine-tune chassis performance. The pocket also lets the battery weights sit flush against the battery, keeping them concealed for a clean, professional look. Whether you're running a 2WD or 4WD modified buggy or looking to dominate in the stock class, this ROAR-approved battery provides the punch, runtime, and reliability needed for top-level performance.
This battery features a 130C peak discharge rating, delivering explosive acceleration and sustained voltage through your entire run. Its LCG shorty configuration improves chassis balance while maximizing space efficiency, especially on platforms like the Team Associated RC10 series. Outfitted with five-millimeter bullet connectors for optimal current flow and minimal resistance, this special edition pack is engineered for racers who demand the highest performance in a compact form.
Lab testing has shown that ProTek R/C Silicon Graphene packs offer double the cycle life when charged at 1C rates and support higher amp charge rates with minimal risk of damage. Most notably, the battery maintains a flatter discharge curve, ensuring consistent voltage output throughout the run with no significant drop-off. Compared to conventional LiPo batteries, these Silicon Graphene cells are lighter and deliver a superior capacity-to-weight ratio. With a 7.6V nominal voltage, 130C discharge capability, and cutting-edge chemistry, the Spencer Rivkin Edition pack is a top-tier choice for racers who settle for nothing less than the best.
Includes:
- (1) ProTek R/C Battery
- (2) 5mm to 4mm Bullet Reducers
- (2) 5mm Bullet Connectors
- (1) 2mm Balance Bullet Connector
Features:
- Special edition pack designed in collaboration with Spencer Rivkin
- ROAR approved for use in sanctioned racing events
- 130C peak discharge rating delivers extreme punch and power
- LCG shorty design improves weight distribution and handling
- Ideal for 2WD and 4WD modified or stock class racing applications
- Five-millimeter bullet connectors for high-current, low-resistance performance
- Built with Silicon Graphene cells for flatter discharge and extended cycle life
IMPORTANT LITHIUM POLYMER SAFETY INFORMATION
- DO NOT leave a battery in your model when charging
- DO NOT leave lithium batteries unattended when charging
- ALWAYS balance charge lithium battery
- ALWAYS use a LiPo Safe charging bag/box
- YOU MUST use a Li-Poly specific charger to charge lithium batteries (NiMH or NiCD only chargers WILL NOT WORK!)
- YOU MUST not over discharge lithium battery packs
- READ & UNDERSTAND the instructions carefully before operating this battery
NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in overheated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for the first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use a battery that has too low a voltage. Do not expose batteries to sunshine or store/charge batteries at temperatures above 35°C or in a closed car. The high-temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging, or racing, do not charge it until it has cooled completely. Wait about 20 mins, then inspect prior to recharging.